Secuura PRO is the most economical choice for users of acrylic paint with protection and decoration. Secuura PRO can be used for interiors also.
Secuura PRO: Best value for money for all, protects and decorates, does not peel off or crack, contains special biocides which protect the paint film against algae and fungi, high colour retention, can be used as self priming coat at 100% dilution, contains special acrylic emulsion binder, quick drying, curing is not required.
1. Plaster :
New masonry surfaces must be allowed to cure completely. Recommended curing time is 28 days minimum. Though a coat of Walmark Exterior Primer is recommended for best performance.
2. Cleaning :
Surface should be free from any loose paint, dust or grease. Growth of fungus, algae or moss should be removed by wire brushing and water.
3. Filling the Cracks, Holes & Dents :
For filling cracks upto 3mm, holes and dents use Walmark Cement Putty or white cement and fine sand in the ratio 1:3
For exterior surfaces or substrates that are subjected to continuous seepage or dampness, kindly get the repairs done before the top coat application.
4. Colours Available :
150+** currently available in shades.
5. Mixing Ratio :
Mix 2 Parts of Secuura PRO with 1 part of clean potable water by volume for easy brushability.
6. Coverage :
Coverage for 2 coat finishes is 6-8 sq.mt per litre for 2 coat finish. Actual coverage may vary according to the porosity and texture of the surface. For abundant precaution, an initial trial may be undertaken to determine covering capacity on very rough or abnormal surfaces.
7. Available Pack Sizes :
The pack sizes available for Secuura PRO are 20 ltr., 10 ltr., 4 ltr. and 1 ltr.
Application | Recoating period | ||
Step 1 WALMARK Cement putty/ Acrylic Putty (optional) Trowel |
O/N | ||
Step 2 WALMARK Exterior primer Brush/roller/spray |
4 hrs | ||
Step 3 Secuura PRO exterior emulsion Brush/roller/spray |
4 – 6 hrs | ||
Step 4 Secuura PRO exterior emulsion Brush/roller/spray |
4 – 6 hrs |
Recoat period is quoted for 25°C and 50% Relative Humidity; these may vary under different conditions.
Some shades may require 3 coats for proper hiding.
Keep containers airtight during handling and storage to avoid loss of material. Store Secuura PRO in a cool dry place and also protect it from extreme climatic conditions during storage, in transit and at site.
Kindly refer to the MSDS for Secuura PRO which gives detailed information on safety measures while handling the paint, which is available on request.
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth.
PRECAUTIONS
It is not advisable to use any waterproofing chemical as base, top coat or additive. Over dilution of Secuura PRO may result in shade variation, poor hiding, poor bonding or flaking. Excessive brushing and stretching are also to be avoided. No thinner or universal stainer is to be used with Secuura PRO.
For the best performance of the paint, ensure proper washing and cleaning at regular intervals of six months.